lds_01_raw
The starting point is a junction: the intersection of the top tube and the seat tube. Across models, across eras, this junction always forms a right angle. lds_01_raw is the piece exactly as it comes out of the printer, no finish. Positioned on the frame, it holds two states simultaneously: useless and meaningless. Compatible with vintage bicycles using 25.4mm diameter tubing.
Specifications
Shipping calculated at checkout. Free to Paris. 8 euros to France. 15 euros to Europe. 36 euros elsewhere. Allow 15 to 30 days.
Frame fit confirmed by photo, sent to italomecano@gmail.com before ordering.
Specifications
Shipping calculated at checkout. Free to Paris. 8 euros to France. 15 euros to Europe. 36 euros elsewhere. Allow 15 to 30 days.
Frame fit confirmed by photo, sent to italomecano@gmail.com before ordering.
Newsletter
installation
LDS_01 RAWThe object occupies the junction of top tube and seat tube: a structural node, the point where two directions meet. It belongs to vintage steel frames.
- Developed around European bicycles from the 1980s and 1990s. Three tube standards: English, Italian, French, all at 25.4 mm.
- Attachment by pressure alone. No drilling. No permanent modification. The frame is left as it was found.
- Inside the form, a concealed housing holds the Knog Plus Rear Bike Light. The function is enclosed within the shape.
- Each unit includes stainless steel seat clamp bolts, selected for visual coherence with the raw MJF finish.
- PositionTop tube × seat tube
- FramesVintage steel
- Standard25.4 mm tubes
- LightKnog Plus Rear
- ProcessHP Multi Jet Fusion
- MaterialNylon PA12
Artistic Direction: Italo 3D Design: Angel Ricalde